avfilter: add adeclick and adeclip audio filters

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Changelog

@@ -11,6 +11,8 @@ version <next>:
 - support mbedTLS based TLS
 - DNN inference interface
 - Reimplemented SRCNN filter using DNN inference interface
+- adeclick filter
+- adeclip filter
 
 
 version 4.0:

doc/filters.texi

@@ -551,6 +551,102 @@ Set LFO range.
 Set LFO rate.
 @end table
+@section adeclick
+Remove impulsive noise from input audio.
+
+Samples detected as impulsive noise are replaced by interpolated samples using
+autoregressive modelling.
+
+@table @option
+@item w
+Set window size, in milliseconds. Allowed range is from @code{10} to
+@code{100}. Default value is @code{55} milliseconds.
+This sets size of window which will be processed at once.
+
+@item o
+Set window overlap, in percentage of window size. Allowed range is from
+@code{50} to @code{95}. Default value is @code{75} percent.
+Setting this to a very high value increases impulsive noise removal but makes
+whole process much slower.
+
+@item a
+Set autoregression order, in percentage of window size. Allowed range is from
+@code{0} to @code{25}. Default value is @code{2} percent. This option also
+controls quality of interpolated samples using neighbour good samples.
+
+@item t
+Set threshold value. Allowed range is from @code{1} to @code{100}.
+Default value is @code{2}.
+This controls the strength of impulsive noise which is going to be removed.
+The lower value, the more samples will be detected as impulsive noise.
+
+@item b
+Set burst fusion, in percentage of window size. Allowed range is @code{0} to
+@code{10}. Default value is @code{2}.
+If any two samples deteced as noise are spaced less than this value then any
+sample inbetween those two samples will be also detected as noise.
+
+@item m
+Set overlap method.
+
+It accepts the following values:
+@table @option
+@item a
+Select overlap-add method. Even not interpolated samples are slightly
+changed with this method.
+
+@item s
+Select overlap-save method. Not interpolated samples remain unchanged.
+@end table
+
+Default value is @code{a}.
+@end table
+
+@section adeclip
+Remove clipped samples from input audio.
+
+Samples detected as clipped are replaced by interpolated samples using
+autoregressive modelling.
+
+@table @option
+@item w
+Set window size, in milliseconds. Allowed range is from @code{10} to @code{100}.
+Default value is @code{55} milliseconds.
+This sets size of window which will be processed at once.
+
+@item o
+Set window overlap, in percentage of window size. Allowed range is from @code{50}
+to @code{95}. Default value is @code{75} percent.
+
+@item a
+Set autoregression order, in percentage of window size. Allowed range is from
+@code{0} to @code{25}. Default value is @code{8} percent. This option also controls
+quality of interpolated samples using neighbour good samples.
+
+@item t
+Set threshold value. Allowed range is from @code{1} to @code{100}.
+Default value is @code{10}. Higher values make clip detection less aggressive.
+
+@item n
+Set size of histogram used to detect clips. Allowed range is from @code{100} to @code{9999}.
+Default value is @code{1000}. Higher values make clip detection less aggressive.
+
+@item m
+Set overlap method.
+
+It accepts the following values:
+@table @option
+@item a
+Select overlap-add method. Even not interpolated samples are slightly changed
+with this method.
+
+@item s
+Select overlap-save method. Not interpolated samples remain unchanged.
+@end table
+
+Default value is @code{a}.
+@end table
+
 @section adelay
 Delay one or more audio channels.

libavfilter/Makefile

@@ -36,6 +36,8 @@ OBJS-$(CONFIG_ACONTRAST_FILTER)              += af_acontrast.o
 OBJS-$(CONFIG_ACOPY_FILTER)                  += af_acopy.o
 OBJS-$(CONFIG_ACROSSFADE_FILTER)             += af_afade.o
 OBJS-$(CONFIG_ACRUSHER_FILTER)               += af_acrusher.o
+OBJS-$(CONFIG_ADECLICK_FILTER)               += af_adeclick.o
+OBJS-$(CONFIG_ADECLIP_FILTER)                += af_adeclick.o
 OBJS-$(CONFIG_ADELAY_FILTER)                 += af_adelay.o
 OBJS-$(CONFIG_ADERIVATIVE_FILTER)            += af_aderivative.o
 OBJS-$(CONFIG_AECHO_FILTER)                  += af_aecho.o

libavfilter/allfilters.c

@@ -29,6 +29,8 @@ extern AVFilter ff_af_acontrast;
 extern AVFilter ff_af_acopy;
 extern AVFilter ff_af_acrossfade;
 extern AVFilter ff_af_acrusher;
+extern AVFilter ff_af_adeclick;
+extern AVFilter ff_af_adeclip;
 extern AVFilter ff_af_adelay;
 extern AVFilter ff_af_aderivative;
 extern AVFilter ff_af_aecho;

libavfilter/version.h

@@ -30,7 +30,7 @@
 #include "libavutil/version.h"
 
 #define LIBAVFILTER_VERSION_MAJOR   7
-#define LIBAVFILTER_VERSION_MINOR  24
+#define LIBAVFILTER_VERSION_MINOR  25
 #define LIBAVFILTER_VERSION_MICRO 100
 
 #define LIBAVFILTER_VERSION_INT AV_VERSION_INT(LIBAVFILTER_VERSION_MAJOR, \