Newer
Older
/*
* copyright (c) 2001 Fabrice Bellard
*
* This file is part of Libav.
Diego Biurrun
committed
*
* Libav is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
Diego Biurrun
committed
* version 2.1 of the License, or (at your option) any later version.
* Libav is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with Libav; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
Reinhard Tartler
committed
* libavcodec API use example.
* Note that this library only handles codecs (mpeg, mpeg4, etc...),
* not file formats (avi, vob, etc...). See library 'libavformat' for the
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#ifdef HAVE_AV_CONFIG_H
#undef HAVE_AV_CONFIG_H
#endif
#include "libavcodec/avcodec.h"
#include "libavutil/channel_layout.h"
#include "libavutil/mathematics.h"
#include "libavutil/samplefmt.h"
#define AUDIO_INBUF_SIZE 20480
#define AUDIO_REFILL_THRESH 4096
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
/* check that a given sample format is supported by the encoder */
static int check_sample_fmt(AVCodec *codec, enum AVSampleFormat sample_fmt)
{
const enum AVSampleFormat *p = codec->sample_fmts;
while (*p != AV_SAMPLE_FMT_NONE) {
if (*p == sample_fmt)
return 1;
p++;
}
return 0;
}
/* just pick the highest supported samplerate */
static int select_sample_rate(AVCodec *codec)
{
const int *p;
int best_samplerate = 0;
if (!codec->supported_samplerates)
return 44100;
p = codec->supported_samplerates;
while (*p) {
best_samplerate = FFMAX(*p, best_samplerate);
p++;
}
return best_samplerate;
}
/* select layout with the highest channel count */
static int select_channel_layout(AVCodec *codec)
{
const uint64_t *p;
uint64_t best_ch_layout = 0;
if (!codec->channel_layouts)
return AV_CH_LAYOUT_STEREO;
p = codec->channel_layouts;
while (*p) {
int nb_channels = av_get_channel_layout_nb_channels(*p);
}
p++;
}
return best_ch_layout;
}
static void audio_encode_example(const char *filename)
AVFrame *frame;
AVPacket pkt;
int i, j, k, ret, got_output;
int buffer_size;
float t, tincr;
printf("Audio encoding\n");
/* find the MP2 encoder */
codec = avcodec_find_encoder(AV_CODEC_ID_MP2);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
/* check that the encoder supports s16 pcm input */
c->sample_fmt = AV_SAMPLE_FMT_S16;
if (!check_sample_fmt(codec, c->sample_fmt)) {
fprintf(stderr, "encoder does not support %s",
av_get_sample_fmt_name(c->sample_fmt));
exit(1);
}
/* select other audio parameters supported by the encoder */
c->sample_rate = select_sample_rate(codec);
c->channel_layout = select_channel_layout(codec);
c->channels = av_get_channel_layout_nb_channels(c->channel_layout);
fprintf(stderr, "could not open codec\n");
exit(1);
}
Matthias Fritschi
committed
f = fopen(filename, "wb");
if (!f) {
fprintf(stderr, "could not open %s\n", filename);
exit(1);
}
/* frame containing input raw audio */
frame = av_frame_alloc();
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
if (!frame) {
fprintf(stderr, "could not allocate audio frame\n");
exit(1);
}
frame->nb_samples = c->frame_size;
frame->format = c->sample_fmt;
frame->channel_layout = c->channel_layout;
/* the codec gives us the frame size, in samples,
* we calculate the size of the samples buffer in bytes */
buffer_size = av_samples_get_buffer_size(NULL, c->channels, c->frame_size,
c->sample_fmt, 0);
samples = av_malloc(buffer_size);
if (!samples) {
fprintf(stderr, "could not allocate %d bytes for samples buffer\n",
buffer_size);
exit(1);
}
/* setup the data pointers in the AVFrame */
ret = avcodec_fill_audio_frame(frame, c->channels, c->sample_fmt,
(const uint8_t*)samples, buffer_size, 0);
if (ret < 0) {
fprintf(stderr, "could not setup audio frame\n");
exit(1);
}
tincr = 2 * M_PI * 440.0 / c->sample_rate;
av_init_packet(&pkt);
pkt.data = NULL; // packet data will be allocated by the encoder
pkt.size = 0;
for (j = 0; j < c->frame_size; j++) {
for (k = 1; k < c->channels; k++)
samples[2*j + k] = samples[2*j];
ret = avcodec_encode_audio2(c, &pkt, frame, &got_output);
if (ret < 0) {
fprintf(stderr, "error encoding audio frame\n");
exit(1);
}
if (got_output) {
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
av_frame_free(&frame);
static void audio_decode_example(const char *outfilename, const char *filename)
uint8_t inbuf[AUDIO_INBUF_SIZE + FF_INPUT_BUFFER_PADDING_SIZE];
AVFrame *decoded_frame = NULL;
codec = avcodec_find_decoder(AV_CODEC_ID_MP2);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
fprintf(stderr, "could not open codec\n");
exit(1);
}
Matthias Fritschi
committed
f = fopen(filename, "rb");
if (!f) {
fprintf(stderr, "could not open %s\n", filename);
exit(1);
}
Matthias Fritschi
committed
outfile = fopen(outfilename, "wb");
avpkt.size = fread(inbuf, 1, AUDIO_INBUF_SIZE, f);
while (avpkt.size > 0) {
int got_frame = 0;
if (!decoded_frame) {
if (!(decoded_frame = av_frame_alloc())) {
fprintf(stderr, "out of memory\n");
exit(1);
}
len = avcodec_decode_audio4(c, decoded_frame, &got_frame, &avpkt);
if (len < 0) {
fprintf(stderr, "Error while decoding\n");
exit(1);
/* if a frame has been decoded, output it */
int data_size = av_samples_get_buffer_size(NULL, c->channels,
decoded_frame->nb_samples,
c->sample_fmt, 1);
fwrite(decoded_frame->data[0], 1, data_size, outfile);
}
avpkt.size -= len;
avpkt.data += len;
if (avpkt.size < AUDIO_REFILL_THRESH) {
/* Refill the input buffer, to avoid trying to decode
* incomplete frames. Instead of this, one could also use
* a parser, or use a proper container format through
* libavformat. */
memmove(inbuf, avpkt.data, avpkt.size);
avpkt.data = inbuf;
len = fread(avpkt.data + avpkt.size, 1,
AUDIO_INBUF_SIZE - avpkt.size, f);
if (len > 0)
avpkt.size += len;
}
}
fclose(outfile);
fclose(f);
avcodec_close(c);
av_frame_free(&decoded_frame);
static void video_encode_example(const char *filename)
AVPacket pkt;
uint8_t endcode[] = { 0, 0, 1, 0xb7 };
printf("Video encoding\n");
/* find the mpeg1 video encoder */
codec = avcodec_find_encoder(AV_CODEC_ID_MPEG1VIDEO);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
picture = av_frame_alloc();
/* put sample parameters */
c->bit_rate = 400000;
/* resolution must be a multiple of two */
c->gop_size = 10; /* emit one intra frame every ten frames */
c->pix_fmt = AV_PIX_FMT_YUV420P;
fprintf(stderr, "could not open codec\n");
exit(1);
}
Matthias Fritschi
committed
f = fopen(filename, "wb");
if (!f) {
fprintf(stderr, "could not open %s\n", filename);
exit(1);
}
ret = av_image_alloc(picture->data, picture->linesize, c->width, c->height,
c->pix_fmt, 32);
if (ret < 0) {
fprintf(stderr, "could not alloc raw picture buffer\n");
exit(1);
}
picture->format = c->pix_fmt;
picture->width = c->width;
picture->height = c->height;
/* encode 1 second of video */
for(i=0;i<25;i++) {
av_init_packet(&pkt);
pkt.data = NULL; // packet data will be allocated by the encoder
pkt.size = 0;
fflush(stdout);
/* prepare a dummy image */
/* Y */
for(y=0;y<c->height;y++) {
for(x=0;x<c->width;x++) {
picture->data[0][y * picture->linesize[0] + x] = x + y + i * 3;
}
}
/* Cb and Cr */
for(y=0;y<c->height/2;y++) {
for(x=0;x<c->width/2;x++) {
picture->data[1][y * picture->linesize[1] + x] = 128 + y + i * 2;
picture->data[2][y * picture->linesize[2] + x] = 64 + x + i * 5;
ret = avcodec_encode_video2(c, &pkt, picture, &got_output);
if (ret < 0) {
fprintf(stderr, "error encoding frame\n");
exit(1);
}
if (got_output) {
printf("encoding frame %3d (size=%5d)\n", i, pkt.size);
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
/* get the delayed frames */
for (got_output = 1; got_output; i++) {
ret = avcodec_encode_video2(c, &pkt, NULL, &got_output);
if (ret < 0) {
fprintf(stderr, "error encoding frame\n");
exit(1);
}
if (got_output) {
printf("encoding frame %3d (size=%5d)\n", i, pkt.size);
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
/* add sequence end code to have a real mpeg file */
fwrite(endcode, 1, sizeof(endcode), f);
av_frame_free(&picture);
static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,
char *filename)
{
FILE *f;
int i;
f=fopen(filename,"w");
fprintf(f,"P5\n%d %d\n%d\n",xsize,ysize,255);
for(i=0;i<ysize;i++)
fwrite(buf + i * wrap,1,xsize,f);
fclose(f);
}
static void video_decode_example(const char *outfilename, const char *filename)
uint8_t inbuf[INBUF_SIZE + FF_INPUT_BUFFER_PADDING_SIZE];
AVPacket avpkt;
av_init_packet(&avpkt);
/* set end of buffer to 0 (this ensures that no overreading happens for damaged mpeg streams) */
memset(inbuf + INBUF_SIZE, 0, FF_INPUT_BUFFER_PADDING_SIZE);
printf("Video decoding\n");
/* find the mpeg1 video decoder */
codec = avcodec_find_decoder(AV_CODEC_ID_MPEG1VIDEO);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
picture = av_frame_alloc();
if (codec->capabilities & AV_CODEC_CAP_TRUNCATED)
c->flags |= AV_CODEC_FLAG_TRUNCATED; // we do not send complete frames
/* For some codecs, such as msmpeg4 and mpeg4, width and height
MUST be initialized there because this information is not
available in the bitstream. */
fprintf(stderr, "could not open codec\n");
exit(1);
}
/* the codec gives us the frame size, in samples */
Matthias Fritschi
committed
f = fopen(filename, "rb");
if (!f) {
fprintf(stderr, "could not open %s\n", filename);
exit(1);
}
avpkt.size = fread(inbuf, 1, INBUF_SIZE, f);
if (avpkt.size == 0)
break;
/* NOTE1: some codecs are stream based (mpegvideo, mpegaudio)
and this is the only method to use them because you cannot
know the compressed data size before analysing it.
BUT some other codecs (msmpeg4, mpeg4) are inherently frame
based, so you must call them with all the data for one
frame exactly. You must also initialize 'width' and
'height' before initializing them. */
/* NOTE2: some codecs allow the raw parameters (frame size,
sample rate) to be changed at any frame. We handle this, so
you should also take care of it */
/* here, we use a stream based decoder (mpeg1video), so we
feed decoder and see if it could decode a frame */
avpkt.data = inbuf;
while (avpkt.size > 0) {
len = avcodec_decode_video2(c, picture, &got_picture, &avpkt);
if (len < 0) {
fprintf(stderr, "Error while decoding frame %d\n", frame);
exit(1);
}
if (got_picture) {
printf("saving frame %3d\n", frame);
fflush(stdout);
/* the picture is allocated by the decoder. no need to
free it */
snprintf(buf, sizeof(buf), outfilename, frame);
pgm_save(picture->data[0], picture->linesize[0],
avpkt.size -= len;
avpkt.data += len;
}
}
/* some codecs, such as MPEG, transmit the I and P frame with a
latency of one frame. You must do the following to have a
chance to get the last frame of the video */
avpkt.data = NULL;
avpkt.size = 0;
len = avcodec_decode_video2(c, picture, &got_picture, &avpkt);
printf("saving last frame %3d\n", frame);
/* the picture is allocated by the decoder. no need to
free it */
snprintf(buf, sizeof(buf), outfilename, frame);
pgm_save(picture->data[0], picture->linesize[0],
av_frame_free(&picture);
printf("\n");
}
int main(int argc, char **argv)
{
const char *filename;
/* register all the codecs */
if (argc <= 1) {
audio_encode_example("/tmp/test.mp2");
audio_decode_example("/tmp/test.sw", "/tmp/test.mp2");
video_encode_example("/tmp/test.mpg");
filename = "/tmp/test.mpg";
} else {
filename = argv[1];
}
// audio_decode_example("/tmp/test.sw", filename);
video_decode_example("/tmp/test%d.pgm", filename);
return 0;
}