From 13696c378989252da2706f357b330240a46ea7f3 Mon Sep 17 00:00:00 2001 From: Paul B Mahol <onemda@gmail.com> Date: Sat, 28 Nov 2015 18:17:02 +0100 Subject: [PATCH] doc/filters: extend agate documentation Signed-off-by: Paul B Mahol <onemda@gmail.com> --- doc/filters.texi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/doc/filters.texi b/doc/filters.texi index e505ad7b3a7..c8471e551c5 100644 --- a/doc/filters.texi +++ b/doc/filters.texi @@ -732,36 +732,46 @@ Shorter signals than the chosen attack time will be left untouched. @table @option @item level_in Set input level before filtering. +Default is 1. Allowed range is from 0.015625 to 64. @item range Set the level of gain reduction when the signal is below the threshold. +Default is 0.06125. Allowed range is from 0 to 1. @item threshold If a signal rises above this level the gain reduction is released. +Default is 0.125. Allowed range is from 0 to 1. @item ratio Set a ratio about which the signal is reduced. +Default is 2. Allowed range is from 1 to 9000. @item attack Amount of milliseconds the signal has to rise above the threshold before gain reduction stops. +Default is 20 milliseconds. Allowed range is from 0.01 to 9000. @item release Amount of milliseconds the signal has to fall below the threshold before the -reduction is increased again. +reduction is increased again. Default is 250 milliseconds. +Allowed range is from 0.01 to 9000. @item makeup Set amount of amplification of signal after processing. +Default is 1. Allowed range is from 1 to 64. @item knee Curve the sharp knee around the threshold to enter gain reduction more softly. +Default is 2.828427125. Allowed range is from 1 to 8. @item detection Choose if exact signal should be taken for detection or an RMS like one. +Default is peak. Can be peak or rms. @item link Choose if the average level between all channels or the louder channel affects the reduction. +Default is average. Can be average or maximum. @end table @section alimiter -- GitLab